Fire Hollow Metals

Metal Wood

is proudct to manufac-ture its products of fire rated andnon fire rated steel doors, that fol-low the international standards UL, HMMA, the national fire fighting in-stitute, NFPA and the Egyptian code for fire.

Our products include various types of doors:

  • Fire rated and non fire rated hinged doors.
  • Sound proof hinged doors.
  • X-Ray resisting hinged doors.
  • Security hinged doors.
  • Hinged doors for medical & pharmaceutical uses.

Fire rated opening

Requirements

  • Fire door must have a label attached.
  • Fire door must be self-latching
  • Fire door preferred to be self-closer.
  • If a fire door is held open; it must be equipped with a listed heat responsive device, fusible link or a smoke detection device.
  • Fire door must be free of any obstruction which could prevent the door from operating property i.e. wedge door stops, chains, hook backs, floor holder.
  • Only fire rated door hardware shall be used.



  • Access Doors.
  • Fire rated and non fire rated sliding doors
  • Fire rated wooden hinged doors.
  • Hinged doors with louvers.





  • Fire door must have steel bearing type hinges.
  • Doors swinging in pairs that require astragals shall have at least one overlapping astragals. Pairs of door within a means of egress shall not be equipped with an astragal that inhibits the free use of either leaf. A coordinator or open back strike should be used to ensure proper closing.
  • - Fire doors with glass lights:
    • - The glass frame and glazing bead must be metal
    • - The glass must be wire glass not less than 0.25 inch thick.
    • - Maximum allowable glass area:
    • - 1.5- hour 100sq.in.perdoor leaf
    • - 3⁄4 hour 1296 sq.in.per light
    • - Fire doors with fusible link louvers
    • - Only listed louver can be used.
    • - Louvers can be furnished in 1 1⁄2 hour
    • - Maximum louver size is 24” X 24”

 

ADDRESS

  • Address: 91 El-Marghany St, Cairo
    Egypt
  • Email: architectmisr1@yahoo.com
  • Website: www.architechmisr.com
  • Tel/Fax: (202) 24715661 / 26903366

FOLLOW US